Model No.

AF-AC-07-B-A-O-2/4-SC-P

AF-AC-07-B-A-O-2/4-SC

Specification

Rated Power

7KW

Charging Device

Installation Method

Wall mounted

Feeding Method

Bottom in and bottom out

Equipment Dimension

370*255*85 mm

Equipment Weight

16 KGS

Cable Length

5m ( Optional )

Electrical Indicators

Input Voltage

AC 220V±20%; L+N+PE

Input Frequency

50 Hz ±10% 

Output Voltage

AC 220V±20%

 Output Current 

32 A

Current Limit Protection Value

≥110%

Electrical Indicators

≥11

Metering Accuracy

1.0 Level

Functional Design

HMI

4.3 Inch touch screen, LED indicator strip

Communication Protocol

OCPP 1.6J

Charging Mode

Automatic charging full / Fixed power / Fixed Amount / Fixed time 

Networking Method

Ethernet, 4G

Mode of payment

Credit card  / Scan code

Charging method

Swipe Card / Scan code

Operation Mode

Offline no billing, offline billing, online billing

Safety Design

Operative Norm

IEC 62196-2:2016；IEC61851-1:2017

Safety Function

Charge gun temperature detection, overvoltage protection, undervoltage protection, overload protection, short circuit protection, grounding protection, over temperature protection, low temperature protection, insulation monitoring protection, polarity reverse protection, lightning protection, emergency stop protection, leakage protection

Environmental  Indicators

Working Temperature

-20℃~+50℃

Working Humidity

5%~95% non-condensing frost

Working Altitude

≤2000m

Ingress Protection

IP54

Cooling Method

Natural air cooling

Noisy Control

≤40dB

MTBF

30,000hours

Serial Number

Common Malfunctions

Method Of Exclusion

1

When the gun is inserted， the interface does not show the connection or the information “Please start charging by swiping your card”

Please check whether the charging gun is reliably connected to the vehicle and whether the gun lock is locked.

2

Swiping the card to start charging, after a while, it stops by itself

Generally, it is a communication problem, so when you finish swiping the card, record it yourself and try again with a different gun. If it happens repeatedly, report it to the manufacturer in time.

3

Locking phenomenon

At the end of charging, remember to swipe the card for settlement. If the card is locked, please swipe the card at the machine that was charged last time, and you can unlock it after the last charging fee is settled.

4

Jumping gun phenomenon

When swiping the card, confirm that the IC card balance is sufficient. If the balance is insufficient during the charging process, the charging will be automatically terminated.

5

After charging, the gun is locked and cannot be pulled out

Restart the charging process and wait for the gun to jump after the power is off. If this method is still unplugged, immediately contact the manufacturer for maintenance.

6

Start charging, the ammeter does not display the working current

Please check whether the phase line and neutral line of the electric energy meter are connected reversely or wrongly.

7

After powering on, the display does not light up

If the indicator light is on and the display is not on, replace the display.

8

Not grounded

Under normal grounding conditions: 1. When the gun is not inserted, the auxiliary voltage 12V lights up blue; 2. When the gun is inserted, the auxiliary voltage 6V lights up green.