14kW Integrated AC Charging Station Socket Type
Scope Of Application
The AC charging station provides AC power with AC 50/60Hz and rated voltage 220V±20%.
Charging electric vehicles with on-board chargers is mainly suitable for the following places:
- Large, medium, and small electric vehicle charging stations;
- All kinds of electric vehicle parking spaces Public places, such as urban residential quarters, shopping plazas, power business places, etc.;
- High-speed service areas, stations, docks, and other transportation hub areas;
- Real estate and engineering Construction acceptance needs.
Model No. | AF-AC-14-Y-B-O-3-JZ-P | |
Specification | Rated Power | 14KW |
Charging Device | Installation Method | Floor standing mounted |
Feeding Method | Bottom in and bottom out | |
Equipment Dimension | 410*240*1400 mm | |
Cable Length | 5m ( Optional ) | |
Electrical Indicators | Input Voltage | AC 380V±20%; L+N+PE |
Input Frequency | 50 Hz ±10% | |
Output Voltage | AC 220V±20% | |
Output Current | 32 A+32A | |
Current Limit Protection Value | ≥110% | |
Electrical Indicators | ≥11 | |
Metering Accuracy | 1.0 Level | |
Functional Design
| HMI | 4.3-inch high-brightness color touch screen, LED indicator strip |
Charging Mode | Automatic charging full / Fixed power / Fixed Amount / Fixed time | |
Networking Method | Ethernet, 4G, WIFI | |
Mode Of Payment | Credit card / Scan code | |
Charging Method | Swipe Card / Scan code | |
Operation Mode | Offline no billing, offline billing, online billing | |
Dynamic Load Balance | YES | |
Communication Protocol | OCPP 1.6J | |
Safety Design | Operative Norm | IEC61851-1-2017；IEC62196-2: 2016 |
Safety Function | Charge gun temperature detection, overvoltage protection, undervoltage protection, overload protection, short circuit protection, grounding protection, over temperature protection, low temperature protection, insulation monitoring protection, polarity reverse protection, lightning protection, emergency stop protection, leakage protection | |
Environmental Indicators | Working Temperature | -20℃~+50℃ |
Working Humidity | 5%~95% non-condensing frost | |
Working Altitude | ≤2000m | |
Ingress Protection | IP54 | |
Cooling Method | Natural air cooling | |
Noisy Control | ≤40dB | |
MTBF | 30,000hours | |
Check the packing box for the following items before installation (subjetct to the packing list)
- Floor standing mounted type AC charging station(1 set )
- Installation instructions (1 set)
- 1 piece of certificate of quality
- Mounting expansion screws (4 pieces)
- Key (2 pieces)
Installation Environment Requirements
- TheIngress Protection of this series EV AC charging station: IP54;
- Ambient temperature -20℃to +50℃;
6.2.3 Installation Method
This series of EV AC charging stations can be installed Floor standing mounted according to the requirements Installation size, as the Figure：
Floor standing mounted type with four set M12 expansion screws ( holes with a diameter of 16 )
Floor Standing Mounted Type Installation Method
Common Faults And Solutions Of EV AC Charger Station
Serial Number | Common Malfunctions | Method Of Exclusion |
1 | When the gun is inserted，the interface does not show the connection or the information of “Please start charging by swiping your card” | Please check whether the charging gun is reliably connected to the vehicle and whether the gun lock is locked. |
2 | Swiping the card to start charging, after a while, it stops by itself | Generally, it is a communication problem, so when you finish swiping the card, record it yourself and try again with a different gun. If it happens repeatedly, report it to the manufacturer in time. |
3 | Locking phenomenon | At the end of charging, remember to swipe the card for settlement. If the card is locked, please swipe the card at the machine that was charged last time, and you can unlock it after the last charging fee is settled. |
4 | Jumping gun phenomenon | When swiping the card, confirm that the IC card balance is sufficient. If the balance is insufficient during the charging process, the charging will be automatically terminated. |
5 | After charging, the gun is locked and cannot be pulled out | Restart the charging process and wait for the gun to jump after the power is off. If this method is still unplugged, immediately contact the manufacturer for maintenance. |
6 | Start charging, the ammeter does not display the working current | Please check whether the phase line and neutral line of the electric energy meter are connected reversely or wrongly. |
7 | After power on, the display does not light up | If the indicator light is on and the display is not on, replace the display. |
8 | Not grounded | Under normal grounding conditions: 1. When the gun is not inserted, the auxiliary voltage 12V lights up blue; 2. When the gun is inserted, the auxiliary voltage 6V lights up green. |
Maintenance And Preservation Of EV AC Charging Station
- Should charge stationto do a good shade and rain prevention measures, outdoor recommended installation of shelter.
- Check regularly whether all bolts in the charging stationare fastened, whether the connection line is loose, and the connection is not firm. Check for short circuit.
- Pay attention to lightning protection to ensure effective shielding and reliable grounding of charging station
- In use, the output voltage and current of the charging stationare controlled within the nominal range as far as possible to ensure that the charging stationworks in the state of maximum efficiency.
- When the body stops using, stop charging output, then wrap the cable and put it back in place.
Note: in the process of charging station transportation, the charging station is packed firmly and the loading and unloading direction is marked. It is forbidden to store and transport the charging station upside down. There should be corresponding fastening measures to avoid strong vibration and turbulence to damage the outer packaging of the equipment.
Note: Non-professional personnel are strictly prohibited from installing the EV AC charger.
- One installation methods: Floor standing mounted;
- Adopt AC 380VAC input;
- The main control board uses a single-chip microcomputer with an embedded operating system, the charging mode is divided into automatic charging filling and optional charging time, charging amount, and charging electric quantity; RS-485 networking communication interface can be reserved, and optional GPRS, 4G are provided Other networking methods;
- Using a 4.3-inch display screen, which can set the charging mode (the display screen is only available in the operating version);
- Using a single-phase electronic electric energy meter for electricity metering and communicating with the main control board through the RS-485 interface;
- The shape adopts sheet metal and part of ABS plastic structure.
- The ambient air temperature during operation is -20℃~﹢50℃,24h daily average temperature≤35℃( Too high or too low temperature will affect the life of the product );
- The average relative humidity≤90%(25℃ ), no condensation on the surface;
- Pressure: 80 kpa~110 kpa;
- Installation vertical inclination≤5%;
- Experimental level of Vibration and shock in use≤I Level, Inductive strength of an external magnetic field in either direction≤55mT;
- There should be no explosive medium in the place of use, and the surrounding medium does notcontain harmful gases and conductive media that corrode metals and damage insulation, and are not allowed to be filled with water vapor and serious mold bacteria;
- The place of use should avoid direct sunlight. When installing outdoors, it is recommended to addsunshade facilities to the charging stationto prolong the service life of the equipment;
When users have special requirements, please negotiate with our company.
